What is a paper mill waste shredder?

The only challenge in this application is the intertwined wires from bales, other than that even a much less powerful shredder would suffice.

The process can be called chopping rather than shredding as breaking the long wires into pieces, these wires are completely camouflaged and at first instance when the waste is seen it looks like a pretty easy application!

The shredder will have to be big and powerful even if the quantity of the ragger wire, also referred to as ragger tail and pulper rope, is less on a daily basis, This is a dilemma for the smaller units.

We are able to cater to all paper mill units with large capacity and smaller capacities also, contact us now for more details about the shredder that will fit your requirement.

What is Ragger Wire?

During the paper/pulping process when trash is cleaned from the pulper vat. The waste material wraps around itself, creating a compact rope-like chain. Ragger wire consists of plastic trimmings, steel baling wire, staples, foil, insoluble papers and other impurities found in waste papers.

Leading paper manufacturers have a common problem when recycling!

PULPER WASTE

The solution is a PROKATO paper mill waste shredder that can convert it into Refuse Derived Fuel (RDF) to generate the energy required to be used inhouse for paper and board production. In this process, energy generated by burning is used to produce water vapor, which, in turn, is required for the production of high-quality paper and board. This process, from production to reuse of pulper waste, is self-contained and efficient.

Another SOLUTION

waste plastic pyrolysis plant project for paper mill waste recycling to oil, plan installation and commissioning of a waste plastic pyrolysis plant for processing tons of waste plastics into oil.

If you own a paper mill, and produces tons of waste every day, most of which are plastic types, it can be converted into fuel oil through waste plastic pyrolysis plant, and the scrap of the paper mill can be put to good use, although the scrap contains a lot of water and paper waste, it is good that these materials can be dried, and the plastic mixed with paper dust can be completely processed by the waste plastic pyrolysis plant, but the oil yield will not be too high if there is too much water in the plastic. Thus it needs to be dried quickly before feeding in the pyrolysis reactor.

Here you need a PROKATO paper mill waste shredder, our double shaft shredder , breaks up the waste into small pieces helping it to dry fast, reduce the moisture of the raw materials, and then send the waste to the pyrolysis reactor for cracking. After 3 hours of preheating, the fuel oil comes out.

Ordinary plastics such as PP PE PS can be completely processed by plastic pyrolysis plant to obtain fuel oil. So waste containing plastic is also acceptable. If you also want to know if your raw materials can be processed by waste pyrolysis plant, please contact us.